Concrete & Liquid Screed
Carew
Cardigan
01239 612 810
01239 621 684
Pembroke Dock
Ready Mixed Concrete
Here at A&C Aggregates, we offer a full range of Ready-Mix Concrete products, all of which are BSI Kitemark Accredited for conformity to BS EN 206-1 and BS 8500-2. We also offer liquid screed and self-compacting concrete.
Our management team has over 20 years of experience in manufacturing ready mixed concrete and have the expertise and equipment to manage complex large pours.
Our concrete is made locally, using aggregates and sand from local quarries. We offer a range of mixes to suit your needs and can offer advice if you are unsure which product best suits your project. See the list below for our standard mixes:
Standardised prescribed Concrete:
ST1 | ST2 | ST3 | ST4 | ST5
General Concrete:
GEN0 | GEN1 | GEN2 | GEN3
Reinforced Concrete:
RC20/25 | RC23/30 | RC28/35 | RC32/40 | RC35/45 | RC40/50
Paving Concrete:
PAV1 | PAV2
Our prices are highly competitive so please call us for a quote or fill in the enquiry form. We will endeavour to respond to you within 24 hours.
Longfloor Liquid Screed
Longfloor IntegraCure® is a flowing, pumpable cementitious based screed (sometimes called self-levelling/self-compacting screed).
It has been designed to provide a fast drying, smooth, level surface for both domestic and commercial applications prior to the application of floor finishes.
Longfloor is part of Longcliffe Quarries, the UKs largest independent producer of calcium carbonate (limestone), powders, a company with a 90 year old history of quarrying and grinding high purity Derbyshire limestone. It is manufactured in a factory environment that complies with all aspects of ISO 9001.
It dries in ⅓ of the time of a traditional sand/cement screed or standard anhydrite flowing screeds and is used for both domestic and commercial use flooring.
Key benefits include:
- It allows foot traffic in just 24-48 hours after placing
- Underfloor heating systems can be turned on after 7 days and the system gradually brought up to operating temperature
- It is suitable to receive non-moisture sensitive floor finishes between 7-14 days
- It is laitance free – meaning there is no site revisits for sanding
- It is compatible with all types of primers, grouts and adhesives and can even be laid in wet rooms
- Drying shrinkage is significantly reduced compared to other cementitious systems
- It has excellent thermal conductivity ranging from 1.9W/m.K to 2.6W/m.K dependent on raw material package
- Aspect ratio can now exceed 4:1. 25N/mm2 compressive strength and 6N/mm2 flexural strength. Higher strength versions are available upon request